Proven fire-retardant characteristics. Light-weight and rigid composite material, outstanding durability for Signage and Display.

Key Benefits
  • High corrosion resistance
  • Excellent processing parameters, e.g. bending, routing and folding
  • Colour quality, trueness and colour thickness Absolutely flat surface
  • Applicable for screen printing and direct-to-substrate digital printing
  • UV protection
  • Optimized for outdoor use
  • Low thermal expansion compared to plastic materials
  • Low weight combined with high stiffness and dimensional stability
  • Cost-effective
Full Details

ALUCOSIGN® FR is revolutionary development by Alucopanel Middle East LLC as one of the First fire-safe Aluminium composite material for the display and signage markets. The panel combines two 0.30 mm aluminum surface layers with a FR mineral core. The panel has been tested, passed “Class A” & certified when tested in accordance to ASTM E84. The light-weight and rigid composite material is ideal for large signage applications, architectural signs, display and exhibition, POS / POP display, digital & screen printing, photo mounting, interior design, industry and transport.

For further information, you can access the product brochures and technical documents below.

View Brochures
Applications

ALUCOSIGN® FR is suitable for a huge range of applications in a variety of industries.

  • Sign Boards
  • Kitchen Cabinets
Technical

Here are the sheets sizes and thicknesses available as standard along with the technical specification of ALUCOSIGN® FR.

TEST STANDARD REQUIREMENT RESULT
4MM
Panel Thickness Screw Gauge/Vernier caliper (±) 0.2 mm 4
Weight of the Panel Weighing scale ≥ 6.8kg/m2 7.25kg/m2
Standard Width Measuring tape (±) 2 mm 1000, 1250, 1500
Length Measuring tape (±) 2 mm up to 6000 mm
Skin Thickness Screw Gauge/Vernier caliper (±) 0.03 mm 0.3 mm
Alloy / Temper ASTM B209 1100 - H16 1100 - H16
TEST STANDARD REQUIREMENT RESULT
4MM
Surface Burning
Characteristics
ASTM E84-6 (FSI) 25-0
(SDI) 450-0
FSI 20, SDI 75
Class A
Product Certificate TBW 0300185.1
TEST STANDARD REQUIREMENT RESULT
4MM 6MM
Tensile Strength ASTM E8 130-165 N/mm2 130-165 N/mm2
Yield Strength ASTM E8 Min. 117 N/mm2 Min. 117 N/mm2
Elongation ASTM E8 Min. 1.0% 2.00%
TEST STANDARD REQUIREMENT RESULT
4MM
Peel off strength @ 180° ASTM D 1781 ≥ 10 kg/25mm ≥ 10 kg/25mm
TEST STANDARD REQUIREMENT RESULT
4MM
Type / Finish PVDF / HDPE PVDF / HDPE
Coating Thickness ASTM D 1400 ≥ 25μm ≥ 25μm
Weathering Resistance ASTM C 481 A. Shear Strength
B. Film Adhesion
C. Impact Resistance
A. 3.75 Mpa (after exposure)
B.1. Dry Adhesion - No removal of film
B.2. Wet Adhesion - No removal of film
B.3. Boiling Water - No removal of film
C. Impact Resistance - No removal of film
Corrosion Resistance AAMA 2605 A. Humidity Resistance
B. Salt Spray Resistance
A. No formation of blisters
B.1 Scribed - rating of 9
B.2. Unscribed - rating of 10
Abrasion Resistance ASTM D 968 Min 40 L/mil 43.9 L/mil
Pencil Hardness ASTM D 3363 Min HB 2H
Film Adhesion ASTM D3359 No removal of film No removal of film nor blistering
Impact Resistance Test 50 kg-cm ASTM D 2794 No removal of film No removal of film
Colours

In addition to our stock range, ALUCOSIGN® FR. can also be colour matched to almost any RAL colour - allowing corporate colours to be matched with ease.

1) Above color samples displayed are for reference only, before ordering please double check the color of actual material.

2) To avoid possible reflection differences, it is imperative to install the panels in the same direction as marked on the protective film.

3) Please order the total requirements for one particular building in a single order, for metallic and solid colors, an optical change of color shade may occur due to the metallic particles of these lacquers.

4) Tolerance in color between batches: ∆E2.0 in accordance to ISO 7724-3 (EN 1396:1996)

1) Above color samples displayed are for reference only, before ordering please double check the color of actual material.

2) To avoid possible reflection differences, it is imperative to install the panels in the same direction as marked on the protective film.

3) Please order the total requirements for one particular building in a single order, for metallic and solid colors, an optical change of color shade may occur due to the metallic particles of these lacquers.

4) Tolerance in color between batches: ∆E2.0 in accordance to ISO 7724-3 (EN 1396:1996)

Bright Silver

Downloads