Color of your choice, form, bend, route, and fold it. ALUCOSIGN® can provide your signage and display needs with its wide range of color finishes and flexibility.

Key Benefits
  • High corrosion resistance
  • Excellent processing parameters, e.g. bending, routing and folding
  • Colour quality, trueness and colour thickness absolutely flat surface
  • Applicable for screen printing and direct-to-substrate digital printing
  • UV protection
  • Optimized for outdoor use
  • Low thermal expansion compared to plastic materials
  • Low weight combined with high stiffness and dimensional stability
  • Cost-effective
Full Details

The panel combines two 0.30 mm aluminum surface layers. The light-weight and rigid composite material is ideal for large signage applications, architectural signs, display and exhibition, POS / POP display, digital & screen printing, photo mounting, interior design, industry and transport.

For further information, you can access the product brochures and technical documents below.

View Brochures
Applications

ALUCOSIGN® is suitable for a huge range of applications in a variety of industries.

  • Sign Boards
  • Kitchen Cabinets
Technical

Here are the sheets sizes and thicknesses available as standard along with the technical specification of ALUCOSIGN®.

TEST STANDARD TOLERANCE
Thickness Screw Gauge/Vernier caliper (±) 0.2 mm
Width Measuring tape (±) 0.2 mm
Length Measuring tape (±) 0.2 mm
Weight Weighing scale 3mm: 3.9 Kg/mm2     4mm: 5.0 Kg/mm2
Peel Off Test ASTM D 1781 ≥ 10kg/25mm
TEST STANDARD TOLERANCE
Color Difference Test ASTM D 2244 ∆E ≤2.0
(reference to master sample)
Dry Film Thickness (DFT) Test ASTM D 7091 2-Coat: 25 ± 3 μm
3-Coat: 38 ± 3 μm
Specular Gloss @60 ASTM D 523- 89 ±5%
(reference to master sample)
Pencil Hardness Test ASTM D 3363 HB- 4H
Film Adhesion Test by Scratch Resistance AAMA 2605,
ASTM D 3359-09e2
No removal of paint
Film Adhesion Test by Boiling Water AAMA 2605 No removal of paint
Solvent Resistance Test (MEK Test) ASTM D 4752 No removal of paint @ 100 DBR
Coating Flexibility T - Bend Test ASTM D 4145 ≤ 2T
Impact Resistance Test 50 kg-cm ASTM D 2794 No crack and paint peel-off
Chalking Resistance ASTM D 4214 Chalking Rating: 6, after 1000 hours exposure to UV-B
Colours

In addition to our stock range, ALUCOSIGN®. can also be colour matched to almost any RAL colour - allowing corporate colours to be matched with ease.

1) Above color samples displayed are for reference only, before ordering please double check the color of actual material.

2) To avoid possible reflection differences, it is imperative to install the panels in the same direction as marked on the protective film.

3) Please order the total requirements for one particular building in a single order, for metallic and solid colors, an optical change of color shade may occur due to the metallic particles of these lacquers.

4) Tolerance in color between batches: ∆E2.0 in accordance to ISO 7724-3 (EN 1396:1996)

1) Above color samples displayed are for reference only, before ordering please double check the color of actual material.

2) To avoid possible reflection differences, it is imperative to install the panels in the same direction as marked on the protective film.

3) Please order the total requirements for one particular building in a single order, for metallic and solid colors, an optical change of color shade may occur due to the metallic particles of these lacquers.

4) Tolerance in color between batches: ∆E2.0 in accordance to ISO 7724-3 (EN 1396:1996)

Bright Silver

Downloads