Due to its outstanding flatness and formability, LITEPANEL lends itself extremely well to the manufacture of signs. Direct digital print and vinyl application will both adhere brilliantly to the aluminium panel thanks to its extreme smoothness and high-quality PE paint finish. This also makes it perfect for the more traditional screen printing and hand paintings methods.

Litepanel Image
Full Details

The panel combines two 0.10 mm aluminum surface layers. The light-weight and rigid composite material is ideal for large signage applications, architectural signs, display and exhibition, POS / POP display, digital & screen printing, photo mounting, interior design, industry and transport.

For further information, you can access the product brochures and technical documents below.

View Brochures
Applications

LITEPANEL is suitable for a huge range of applications in a variety of industries.

  • Signages
  • Display
  • Curtain Wall
  • Roof Edges
  • Parapet Wall
  • Separation Wall
  • Partition
  • Advertising Plate
  • Showrooms
  • Furniture
Technical

Here are the sheets sizes and thicknesses available as standard along with the technical specification of LITEPANEL.

TEST STANDARD TOLERANCE
Thickness Screw Gauge/Vernier caliper (±) 0.2 mm
Width Measuring tape (±) 0.2 mm
Length Measuring tape (±) 0.2 mm
Weight Weighing scale Kg/mm2
Peel Off Test ASTM D 1781 ≥ 10kg/25mm
TEST STANDARD TOLERANCE
Color Difference Test ASTM D 2244 ∆E ≤2.0
(reference to master sample)
Dry Film Thickness (DFT) Test ASTM D 7091 2-Coat: 25 ± 3 μm
Specular Gloss @60 ASTM D 523- 89 ±5%
(reference to master sample)
Pencil Hardness Test ASTM D 3363 HB- 4H
Film Adhesion Test by Scratch Resistance AAMA 2605,
ASTM D 3359-09e2
No removal of paint
Film Adhesion Test by Boiling Water AAMA 2605 No removal of paint
Solvent Resistance Test (MEK Test) ASTM D 4752 No removal of paint @ 100 DBR
Coating Flexibility T - Bend Test ASTM D 4145 2T without cracks
Impact Resistance Test 50 kg-cm ASTM D 2794 No crack and paint peel-off
Colours

In addition to our stock range, LITEPANEL can also be colour matched to almost any RAL colour - allowing corporate colours to be matched with ease.

1) Above color samples displayed are for reference only, before ordering please double check the color of actual material.

2) To avoid possible reflection differences, it is imperative to install the panels in the same direction as marked on the protective film.

3) Please order the total requirements for one particular building in a single order, for metallic and solid colors, an optical change of color shade may occur due to the metallic particles of these lacquers.

4) Tolerance in color between batches: ∆E2.0 in accordance to ISO 7724-3 (EN 1396:1996)

1) Above color samples displayed are for reference only, before ordering please double check the color of actual material.

2) To avoid possible reflection differences, it is imperative to install the panels in the same direction as marked on the protective film.

3) Please order the total requirements for one particular building in a single order, for metallic and solid colors, an optical change of color shade may occur due to the metallic particles of these lacquers.

4) Tolerance in color between batches: ∆E2.0 in accordance to ISO 7724-3 (EN 1396:1996)

1) Above color samples displayed are for reference only, before ordering please double check the color of actual material.

2) To avoid possible reflection differences, it is imperative to install the panels in the same direction as marked on the protective film.

3) Please order the total requirements for one particular building in a single order, for metallic and solid colors, an optical change of color shade may occur due to the metallic particles of these lacquers.

4) Tolerance in color between batches: ∆E2.0 in accordance to ISO 7724-3 (EN 1396:1996)

1) Above color samples displayed are for reference only, before ordering please double check the color of actual material.

2) To avoid possible reflection differences, it is imperative to install the panels in the same direction as marked on the protective film.

3) Please order the total requirements for one particular building in a single order, for metallic and solid colors, an optical change of color shade may occur due to the metallic particles of these lacquers.

4) Tolerance in color between batches: ∆E2.0 in accordance to ISO 7724-3 (EN 1396:1996)

Dark Gray

Downloads